Description
Face : Natural embossed white paper. Wet strength treatment. FSC Certified.
Adhesive : Water-based permanent acrylic adhesive. Good adhesion to polar surfaces in wet conditions and low temperatures. Especially designed for glass bottles, with excellent resistance to immersion in water/ice. It is not repositionnable.
Liner : One side siliconised clear polyester film.
TEST TEST
TEST TEST
TEST TEST
BrandManter
ApplicationsProduct for high quality labels for beverages, wine and spirits. Recommended for high speeds labellings.
Uses & ApplicationsWine, Spirits & Craft Beer
Printing TechnologyCan be used without problems with the main printing systems: letterpress, offset, hot foil stamping, thermography and screen printing.The characteristic embossings requires specific printing pressure settings. Varnishing and plastic laminating must be assessed in advance. The varnishing coated with an offset machine is almost fully absorbed and therefore does not improve gloss or protection. Screen-printing varnishing achieves better results, although it is often necessary to perform two shots to achieve a distinctly evident result. The surface roughness typical of felt marked papers may give rise to micro defects with plastic laminating caused by incomplete adhesion of the film to the substrate. Testing for suitability between media, printers and inks is always recommended prior to use.
TEST TEST
TEST TEST
TEST TEST
TEST TEST
Additional informationWe recommend the reels to be wound with the face side out. Suitability for neck labels should be thoroughly checked and validated. Not suitable for very small radius. If possible, consider using a product from the Fedrigoni's neck label range for this application. In doubt contact Fedrigoni's technical support team for advice.
The test of resistance is carried out by sticking a blank (unprinted) label on a standard glass bottle. Two days after the label is stuck on, it is submerged in an ice bucket containing icy water for a minimum period of 4 hours and its resistance to immersion is checked.
TEST TEST
TEST TEST
TEST TEST
TEST TEST
Shelf life2 years, under storage conditions as defined by FINAT section 2.5 (20-25°C, 40-50% RH). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life of the product.
TEST TEST
TEST TEST
TEST TEST
TEST TEST
FSC / PEFC FaceFSC MIX CREDIT
FaceMARTELE WHITE WS FSC™
DescriptionNatural embossed white wet strength paper. FSC certified.
FacePremium
Face Grammage (lbs)90
Face Thickness (mil)118
Glosstest gloss
Whitenesstest whiteness
AdhesiveSH9020
DescriptionWater-based permanent acrylic adhesive. Good adhesion to polar surfaces in wet conditions and low temperatures. Especially designed for glass bottles, with excellent resistance to immersion in water/ice. It is not repositionnable.
Tack (lbs/in) glass FTM-913
Min Labelling temperature (F)+6
Usage temperature (F)-20/+81
LinerPET30
DescriptionOne side siliconised clear polyester film.
Face Grammage (lbs)90
Thickness (mil) ISO 53430
Scoredno
Liner TypePET
MARTELE WHITE WS FSC™ / SH9020 / PET30
Code: WNE4055
Type:
Grammage
60.8lbs
north america
english